Cody Hunt Gear • Field & Range
The Peep Sight Height Modification That Changes Everything
Precision Born in the USA.
The Peep Sight Height Modification is engineered for shooters who demand more — more elevation, more reach, and more precision from every charge.
The Problem Every Black Powder Shooter Knows
When Your Sight Runs Out of Sky
You’re lined up on a target at 150, 200, maybe 250 yards. You’ve loaded a 300-grain projectile, you’ve got a tall front sight up front — and then you crank the windage adjustment on your peep sight until it tops out.
Elevation maxed. Distance not reached. The target still waits. It’s one of the most frustrating limitations in long-range black powder shooting: your optic platform simply wasn’t built for the task.
Standard Williams and E.A. Brown style peep sights were designed for an era when most shooting happened at moderate distances with lighter bullets. Push past those boundaries, and you run out of adjustment before you run out of ambition.
“Designed from the ground up for the long-range black powder shooter — because reaching out to 200 yards and beyond demands a sight that can keep up.”
Introducing the Solution
Cody Hunt Gear Peep Sight Height Modification
The Cody Hunt Gear Peep Sight Height Modification is a precision-machined drop-in windage replacement component for Williams and E.A. Brown style peep sights. At 0.125 inches taller than the stock windage piece, it unlocks an entirely new range of elevation adjustment — enough to bring tall front sights and heavy-grain loads into perfect harmony.
Designed specifically to work with front sights measuring 0.5 inches and taller, this modification integrates beautifully with the Williams Western Precision Muzzleloader Front Sight, one of the most trusted front sight setups in black powder competition and hunting. If you’re running a tall blade up front, this is the rear component that finally meets it eye-to-eye.
Key Benefits at a Glance
| Feature | Detail |
|---|---|
| +0.125″ Height | Taller windage block unlocks elevation adjustment your current sight simply can’t reach |
| 300 gr+ Ready | Engineered for 300 grain and heavier black powder bullets — serious long-range performance |
| 0.5″+ Front Sight | Pairs with front sights half an inch and taller, including Williams Western Precision Muzzleloader |
| Drop-In Fit | Replaces the windage portion of Williams and E.A. Brown style peep sights with no modification |
| Solid Aluminum | Milled from solid aluminum billet for precision tolerances and field-tough durability |
| Original Threading | Threads accept your existing aperture — no new hardware required |
| Made in USA | Manufactured domestically to American quality standards |
| 2-Year Warranty | Backed by a two-year limited warranty from Cody Hunt Gear |
Craftsmanship You Can Feel
Milled Solid. Threaded True. Made in America.
This isn’t a stamped, cast, or injection-molded part. The Cody Hunt Gear Peep Sight Height Modification is milled from solid aluminum — the same approach used by precision instrument makers and competitive shooters who refuse to accept sloppy tolerances. Every surface is machined to mate cleanly with your existing sight body, and the aperture threading matches the original peep sight specification exactly.
That last point matters more than it might seem. Because it threads for the original aperture, you can continue using your existing peep — no new aperture purchase required, no adapters, no compromises. It’s a genuine drop-in replacement for the windage section of your Williams or E.A. Brown sight.
Perfect For
- Black powder hunters pushing out past 150 yards who need the elevation headroom to dial in properly.
- Muzzleloader competitors running a precision front sight and heavy projectiles who need the rear component to match their front-end setup.
- Anyone who’s ever been frustrated by a peep sight that simply won’t adjust high enough — you know exactly why this exists.
- Shooters pairing the Williams Western Precision Muzzleloader Front Sight and want a purpose-matched rear windage component.
Full Specifications
- Height Gain: 0.125″ above the stock windage piece
- Compatibility: Williams & E.A. Brown style peep sights
- Front Sight Requirement: 0.5″ and taller
- Bullet Weight Optimization: 300 grain and above
- Recommended Front Sight: Williams Western Precision Muzzleloader Front Sight
- Material: Solid milled aluminum
- Threading: Original peep sight aperture specification
- Origin: Manufactured in the USA
- Warranty: Two-year limited warranty
